CURVA CARACTERÍSTICA DO MICROASPERSOR NAANDAN HADAR 7110

Authors

  • Ezequiel Cesar Carvalho Miola Unesp-FCA-Botucatu-SP
  • Alexandro Luiz Vielmo
  • Karine Lançanova dos Santos
  • Ricardo Luis Schons
  • Adroaldo Dias Robaina
  • Márcia Xavier Peiter

DOI:

https://doi.org/10.15809/irriga.2009v14n1p95-101

Abstract

CURVA CARACTERÍSTICA DO MICROASPERSOR NAANDAN HADAR 7110

 

 

Ezequiel Cesar Carvalho Miola; Alexandro Luiz Vielmo; Karine Lançanova dos Santos; Ricardo Luis Schons; Adroaldo Dias Robaina; Márcia Xavier Peiter

Departamento de Engenharia Rural, Universidade Federal de Santa Maria, RS, ezequielmiola@yahoo.com.br

 

 

1 RESUMO

 

            Este trabalho foi desenvolvido com o objetivo de determinar alguns parâmetros hidráulicos de um microaspersor NaanDan Hadar 7110 com bocal vermelho de diâmetro 1,10 mm e vazão nominal de 61 l h-1. Conduziram-se testes no Laboratório de Hidráulica Agrícola da Universidade Federal de Santa Maria (UFSM), onde foram determinados a equação característica vazão x pressão e o coeficiente de variação de fabricação (CVf). A equação característica obtida foi , ajustada através de regressão linear, com coeficiente de determinação (r²) de 0,998, caracterizando fluxo turbulento, segundo Pizarro (1990); o coeficiente de variação de fabricação (CVf) médio foi considerado excelente, segundo Solomon (1979), bom, segundo a ABNT (1986) e de categoria A, segundo a ISO 9260 (1991).

 

UNITERMOS: coeficiente de variação de fabricação, relação vazão x pressão, hidráulica.

 

 

MIOLA, E. C. C.; VIELMO, A. L.; SANTOS, K. L.; SCHONS, R. L.; ROBAINA, A. D.; PEITER, M. X. CHARACTERISTIC CURVE OF THE NAANDAN HADAR 7110 MICROSPRINKLER

 

 

2 ABSTRACT

 

            This paper was developed with the objective of determining some hydraulic parameters of a microsprinkler NaanDan Hadar 7110 with red mouthpiece of diameter 1,10 mmand nominal flow of 61 lh-1, they behaved tests in the Laboratory of Agricultural Hydraulics of Santa Maria Federal University (UFSM), where they were certain the equation characteristic flow x pressure and the coefficient of production variation (CVf). the obtained characteristic equation was , was adjusted through linear  regression, with a coefficient of determination (r²) equal to 0,998, characterizing turbulent flow according to Pizarro (1990); The coefficient of variation of manufacture (CVf ) medium was considered excellent according to Solomon (1979), good according to ABNT (1986) and of category TO according to ISO 9260 (1991).

 

KEY WORDS: manufacturing variation coeffient, flow x pressure relationship, hydraulic.

Downloads

Published

2009-03-30

How to Cite

MIOLA, Ezequiel Cesar Carvalho; VIELMO, Alexandro Luiz; SANTOS, Karine Lançanova dos; SCHONS, Ricardo Luis; ROBAINA, Adroaldo Dias; PEITER, Márcia Xavier. CURVA CARACTERÍSTICA DO MICROASPERSOR NAANDAN HADAR 7110. IRRIGA, [S. l.], v. 14, n. 1, p. 95–101, 2009. DOI: 10.15809/irriga.2009v14n1p95-101. Disponível em: http://revistas.fca.unesp.br/index.php/irriga/article/view/3402. Acesso em: 24 feb. 2025.

Issue

Vol. 14 No. 1 (2009): Irriga

Section

Artigos

License

This magazine provides public access to all its content, following the principle that free access to research generates greater global knowledge exchange. Such access is associated with a growing reading and citation of an author's work. The copyright of articles published in Revista Irriga is the property of the authors, with first publication rights for the journal. Because they appear in this publicly accessible magazine, articles are free to use, for their own purposes, for educational and non-commercial purposes. Further details can be obtained at http://creativecommons.org/licenses/by-nc-nd/4.0